twin 50 cal warthog gun

Cryticfarm · Post by **Cryticfarm** » Sat Sep 29, 2007 12:51 pm

I'm not THAT good modeling anymore.

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 1:10 pm

ok well then andrew can finish the model and do you think you can do the reanimation since you said it is easy?

Cryticfarm · Post by **Cryticfarm** » Sat Sep 29, 2007 1:22 pm

Yes... Andrew better link everything properly....

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 1:26 pm

ok awsome thanks alot cryticfarm ill make sure andrew does it right and ill tell him to send you the finished model and you can reanimated it and put it on halo CE bloodgulch.

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 3:13 pm

alright well andrew should be on here pretty soon i hope so stay in contact w/ me so I can have him give you the model that is linked perfect. he said he is having a tiny bit of trouble getting it linked but he said he'll get it done. So yeah stay in contact on here thanks

Andrew_b · Post by **Andrew_b** » Sat Sep 29, 2007 4:01 pm

what do you mean linked?

As in it hooks onto the other model?

IDK.

but uhh i just copied the barrel, and put new faces on it. And then i need to edit the gun so the barrels hook on to it.

Also, model needs to be skinned again.

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 4:44 pm

yeah like the picture I said use as a reference....there are two barrels that connect to two seperate places where bullets are fed...the chamber...then a steel or metal w/e rod i guess connects the two guns soooo use use use the picture I gave u ( http://mods.moddb.com/gallery/image/52927/) and dont worry about what he says just look at how the model on this pic is and just put the deflector thing on it too. So pretty much just copy what the picture is right on the back of the warthog and if you can put the little deflector thing on it too.

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 4:46 pm

oooo and andrew, cryticfarm said he would do the reanimation and re-skinning for it as long as you have the modeling part done "properly" he said.

Andrew_b · Post by **Andrew_b** » Sat Sep 29, 2007 4:47 pm

Ok, this is what i have so far.
Pictures:
Not finished, need to edit the part where the barrels hook on.

Edit: Is this properly?

Cryticfarm · Post by **Cryticfarm** » Sat Sep 29, 2007 5:10 pm

Frig... I might not know how to create the animations

. I'll do it if you make it stationary turret (more balanced).

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 5:12 pm

andrew man you are a freakin genious!!!!!!!!!! hey but while your editing the base where the barrels meet the gun can you space them out a little bit more....like instead of being like not even an inch from barrel to barrel can you widen it a bit more?

youhoo7 · Post by **youhoo7** » Sat Sep 29, 2007 5:14 pm

i read some tuts, and i have been practicing, i will make you a new turret, included with animations, and as for skins, i will make you uvw, so you have everything..

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 5:24 pm

ok youhoo7 sure just incase andrew cant finish but hes still the main "guy" but please the more help the better thanks....make the turret on the warthog exactly like as seen in the model above by andre_b but space the barrels out and little bit more than he did so you can distinguish having acuaklly two barrels so instead of being barely an inch from barrel to barel make it around 3-5 and thanks for skinning cuz we need and skinner and animator soo that works great...keep in contact on here too...thanks soooo much man!

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 6:02 pm

hey how is everyone doing... andrew? youhoo7? you guys good? oo and this is a very noobish ? but once youhoo7 puts the stuff onto halo CE in bloodgulch, how do I increase the power of the turret since yeah it would be twice as powerfull??? or does youhoo7 dp that too?

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 7:01 pm

hey andrew just to say again awsome job on the modeling but could you, like shown on the pic I gave you, add another gun...cuz i know yours has the 2 barrels but i was wondering if you could just instead just put the two guns together. Example: on the picture of the ani infantry cannon i gave you it shows the two guns connected with steel bar towards the top back part; could you just remove the bar and link them like that because that is how i wanted it be. even though yours is cool

Andrew_b · Post by **Andrew_b** » Sat Sep 29, 2007 7:09 pm

im not done yet...

Ill show you finished version.

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 7:16 pm

andrew man make sure you read my post that i left at 8:01 tonight ok???!!?!? vert important

Andrew_b · Post by **Andrew_b** » Sat Sep 29, 2007 8:14 pm

aww.

I dont have time to do that. sorry.

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 8:21 pm

how come man? its ok though just give me the finished one you have...do you have work or something or wuts up?

stanford_luver13 · Post by **stanford_luver13** » Sat Sep 29, 2007 9:40 pm

SORRY FOR THE CAPS JUST INPHASIZING.....IM LOGGING OFF FOR TONIGHT CUZ ITS 10:30 I WILL BE BACK ON TOMORROW (SEPT. 30TH) WHERE WE NEED TO CONTINUE....FEEL FREE TO OBVIOUSLY POST THOUGH...I NEED YOUR FEEDBACK